User`s guide

6 of 40
5000CTC2 Series C-Touch Colour Touchscreen Installation Instructions
© Clipsal Australia Pty Ltd
3.3 Infrared Remote Control
The C-Touch touchscreen is supplied with an infrared remote control that can be
used to trigger scenes, switch loads, and adjust lighting levels. the remote control
functionality is incorporated into a software project. The available functions depend
on how the touchscreen is programmed. If multiple C-Touch units are installed, the
same remote control can talk to each of them.
Figure 1. The Infrared Remote Control
4.0 Definitions
Term Definition
Load An electrical device (such as a light) connected to a C-Bus
output unit (such as a dimmer).
Scene A series of actions across multiple outputs, triggered by a
single button. For example, on arrival home, you could use a
scene to switch on lights in the hallway, kitchen and lounge,
and switch on a heater.
Schedule A sequence of events set to occur at particular times in
the future.
Backlight The light behind the LCD screen providing visibility in varying
lighting conditions.