User`s guide

31 of 40
© Clipsal Australia Pty Ltd
5000CTC2 Series C-Touch Colour Touchscreen Installation Instructions
12.0 Specifications
* The provided C-Touch Colour Power Supply must be used. Failure to do so will void
the warranty.
Parameter Description
Supply voltage 5V d.c., 30 W maximum via power pack*
Display type 16.3 cm (6.4 in) TFT Colour Active Matrix LCD
Display resolution 640 × 480 pixels
Display luminance 300 cd/m²
Display contrast ratio better than 100:1
Viewing angle left, right, down: 70°; up: 40°
Backlight lifetime (typical) 50,000 hours, factory exchangeable
Touch surface durability 35 million touches in any one location,
1 million slide touches
C-Bus supply voltage 15 to 36V d.c. @ 20mA required for normal
operation. Does not provide current for the
C-Bus network.
C-Bus control functions Load switching and dimming, control and scheduling
C-Bus connection 2 × C-Bus RJ45 (parallel)
C-Bus System Clock Software selectable
Other connections USB type A x 2
Ethernet, RJ45 x 2, one front, one rear
RS-232, DB9
Audio Line In, 3.5mm stereo
Audio Line Out, 3.5mm stereo
Infrared In, 3.5mm mono
Keyboard, PS/2
Power, 7-pin DIN
Processor VIA Eden Chipset, 300 MHz
Warm up time 2 minutes
Operating temperature
range
10 to 30°C (50 to 86°F)
Operating humidity range 10 to 90% RH (non-condensing)
Weight 1375g (excluding fascia)