User`s guide

24 of 40

5000CTC2 Series C-Touch Colour Touchscreen Installation Instructions

10.0 Using the C-Touch Colour Transfer Utility

The C-Touch Colour Transfer Utility transfers a software project to the touchscreen.

The utility is included with PICED software, that is available from the Downloads

section of the CIS web site: http://www.clipsal.com/cis

This section takes you through the proccess of installing a project on the C-Touch

touchscreen using a direct Ethernet connection. It is also possible to install projects

to multiple C-Touch touchscreen units via a common DHCP network, or a network

where each touchscreen has been conﬁgured with a unique static IP Address.

1) After the touchscreen has been installed and switched on, the default screen

appears (see Figure 15). You must conﬁgure the unit with an IP address and

customised project ﬁle before the touchscreen is ready for use.

Figure 15. The initial screen of an unconﬁgured C-Touch Colour Touchscreen