User`s guide

21 of 40
© Clipsal Australia Pty Ltd
5000CTC2 Series C-Touch Colour Touchscreen Installation Instructions
Figure 14. Audio and IR cables must be looped through the large ferrite filter
7.4 Audio and IR Connections
Audio line in and line out connections (3.5mm stereo sockets) are provided on the
bottom left side of the touchscreen (looking from the front). An infrared input
(3.5mm mono socket) is also provided at this location.
If any of these connections are used, it is important that the cables are looped
through the large ferrite filter provided. This filter applies an additional level of
filtering in order to comply with EMC regulations. Refer to Figure 14.