User`s guide

17 of 40
© Clipsal Australia Pty Ltd
5000CTC2 Series C-Touch Colour Touchscreen Installation Instructions
To remove the fascia:
1) Grasp the right side of the fascia with your left hand.
2) Push the release lock in with your right thumb. At the same time lift the right
side of the fascia plate off and to the right with your left hand (to disengage
the clip).
3) Swing the fascia off towards the left. Refer to Figure 11.
Push the
release lock
Lift off and to the right to disengage
the clip, then swing to the left
Figure 11. Removing the fascia