User`s guide

14 of 40

5000CTC2 Series C-Touch Colour Touchscreen Installation Instructions

6.3 Wall Box

The C-Touch Colour Wall Box, catalogue number 5000CTCWB, allows the

touchscreen to be mounted in a solid wall construction such as brick or stone. It

provides better RF shielding than the Nail Bracket. The wall box (see Figure 8) may

also be used to mount the touchscreen in timber or metal-frame stud walls.

Figure 8. C-Touch Colour Wall Box

To mount the C-Touch Colour using the wall box:

1) Prepare a hole in the wall or place the wall box against a beam of the wall

frame (in stud walls).

2) Fix the wall box into the wall or frame, in an appropriate manner.

3) Feed the cables through to the wall box. Using conduit is recommended. Refer

to Figure 9. The number and positioning of cables depends on the particular

installation. Possible cables are listed in Table 1 (page 12).

4) Hold the touchscreen up to the wall box and plug the cables into the connectors.

5) Insert the unit into the wall box, align the mounting holes with those in the wall

box. Attach the touchscreen to the wall box using the four screws provided.

Do not overtighten. Ensure cables are clear of the mounting screws.