User`s guide

11 of 40

5000CTC2 Series C-Touch Colour Touchscreen Installation Instructions

6.2 Nail Bracket

The C-Touch Colour Nail Bracket, catalogue number 5000CTCNA, provides a

convenient means of mounting the touchscreen. The nail bracket (shown in Figure 6)

is used where it is practical to nail or screw the bracket to a wall frame.

Figure 6. C-Touch Colour Nail Bracket.

To mount the C-Touch Colour using the nail bracket:

1) Place the bracket against a beam of the wall frame.

2) Nail the bracket into the frame. Alternatively mark and drill the holes, then screw

the bracket to the frame.

3) Feed the cables through to the nail bracket. The use of conduit is recommended.

Refer to Figure 7. The number and positioning of cables will vary depending on the

particular installation. Possible cables are listed in Table 1.

4) Hold the touchscreen up to the nail bracket and plut the cables into the connectors.

5) Insert the unit into the nail bracket, lining the mounting holes up with those in the

bracket. Fix the touchscreen to the nail bracket using the four screws provided.

Do not overtighten.