Specifications

Intelligent Building Series C-Touch Installation Instructions

2. The next step is to push the top end of the

wall bracket through the hole in the wall.

The steps in the installation are described in the ve gures which follow.

1. Prepare the wall by marking with the

supplied template. Carefully cut out the

hole indicated on the template. The hole

must not deviate beyond the range of +

3mm and – 0mm to ensure a good t.

Loosely assemble the C-Touch unit by

inserting the two long screws through

the side holes and threading them

through the wall box. Burr the ends of

the screws over so that they cannot be

easily removed at a later date.