Specifications

Intelligent Building Series C-Touch Installation Instructions

4.2 Installing Multiple C-Touch Controllers

Multiple C-Touch units can be installed on any C-Bus Network. These units

may be programmed to operate dependently or independently of each

other. Care must be taken not to overlap infrared reception zones for each

unit if an infrared remote control is used, or both units may trigger a scene,

with unpredictable results.

4.0 Installation Procedure

4.1 Installation Location

It is important to select the right location to install C-Touch.

Some considerations are listed below:

• Provide easy access to unit for switching lights and selecting scenes

• Avoid obstructions to receiving infrared signals from the Remote Control unit

• Keep C-Touch clear of places subject to water, humidity, direct sunlight or

heavy dust

• Allow adequate ventilation

• Do not cover unit

• C-Touch is designed for indoor use only

WRONG RIGHT