Specifications

Intelligent Building Series C-Touch Installation Instructions

16.0 Unit Operation

The many powerful features of C-Touch are fully described in the C-Touch User’s Guide.

Topics covered include:

• Scene Selection

• Dimming Controls

• Using the Remote Control

• Page Navigation

NOTE: Please consult that document for further details on the operation

of your C-Touch.

17.0 Product Specications

Parameter Description

Catalogue Number 5000CT Series C-Touch Control Unit

C-Bus Supply Voltage 15-36V DC @ 40mA required for normal

operation. Does not provide current to

the C-Bus Network

AC Input Impedance 50kΩ @ 1 kHz

Electrical Isolation 3.75 kV RMS from C-Bus to mains

(provided externally to 5000CT)

Control Functions Load switching and dimming

Scenes

Schedules

Maximum number of controlled loads 255 Group Addresses on each

of 10 applications

Status indicators User congurable

Maximum Number of C-Touch Units

on a single C-Bus Network

Night-light Option (Allows permanent LED illumination at

low brightness level)

Warm Up Time 1 minute

Network Clock Software selectable

C-Bus Connection 2 X Loop-in/Loop-out Removable

Terminal blocks provided 0.2-15mm

(24-16 AWG) see section 6 in the

installation instructions for the pin out)

Dimensions 152 x 115 x 42mm (L x W x H)

Weight 365g

Mounting Centres 124mm

Operating Temperature Range 10-30 °C

Operating Humidity Range 10-95% R.H.

Colour Stainless Steel, Brass, Powdercoat