ClippperCreek HCS Series Manual

HCS User Manual
36
MOVING & STORAGE INSTRUCTIONS
NOTE: Both the hardwired HCS and the plug-in HCS are
intended for xed installations. For mounting requirements,
consult the Mounting Procedures section of the
Installation Instructions in this manual.
Always turn o input power to the EVSE at the circuit breaker
panel prior to hard-wiring an HCS to or disconnecting an HCS
from the service lines. Likewise, always turn o input power to the
EVSE at the circuit breaker panel prior to plugging an HCS into or
unplugging an HCS from a NEMA socket.
When transporting the EVSE, do not lift or carry the entire unit by
the charge cable. Likewise, do not lift or carry the entire unit by
the exible conduit and input conductors (HCS) or the NEMA plug
from the plug-in HCS.
The EVSE has a non-operational storage temperature range of
-40°C to +80°C (-40°F to +176°F).