Owner`s manual

• Use only three-wire grounded extension cords suitable for use outdoors and of

sufficient gage to accommodate power requirements.

• Ground the machine! The tile saw must be grounded while in use to protect the

operator from electric shock. The motor is equipped with a three prong

grounding type plug to fit the proper type receptacle. The green [or green &

yellow] conductor in the cord is grounding wire.

• NEVER connect the ground green [or green & yellow] wire to a live terminal.

• Replace frayed or damaged power and extension cords.

• Don’t abuse the cord. Never carry the tool by the cord or yank the cord to

disconnect the plug from the receptacle.

• ALWAYS disconnect the power before servicing or changing accessories or

Diamond Blades

• ALWAYS make sure power switch is in “off” position before connecting the

machine to power.

• ALWAYS check, to make sure wrenches are removed from the motor spindle

before connecting power or starting the tile saw.

• In case of emergency, you can stop the machine by pushing on the front cover of

the switch.

• In the event of the machine breaking down or stopping for no apparent reason,

switch off the main electricity supply, even in case of power supply failure. Only a

qualified electrician is allowed to investigate the trouble and remedy the fault.