Owner`s manual

12
2.3 Technical Specifications
Technical Specifications CTC701
Product Number (UPC) 70184630029
Blade Guard Capacity - in (mm) 7" (177)
Maximum Depth of Cut - in (mm) 2-1/4" (57)
Arbor Size - in (mm) 5/8"
Blade Flange Diameter - in (mm) 3 (78)
Blade Shaft RPM 2,990
Maximum Material Size - in (mm)
1
-NA-
Rip Cut Size - in (mm)
1
-NA-
Diagonal Size - in (mm)
1
-NA-
Cut Depth - in (mm) 1-9/16" (40)
Cutting Table Steel
Built In 45° Miter Cut YES
Cutting Table Zinc Plated Steel
Water Pump Blade Rotates In Water Pan
Power Source Electric
Motor/Engine Type T.E.F.C.
Maximum Horsepower 1.07 HP
Voltage 115 volt
Cycle*/Current/Phase 60 Hz/AC/1
Full Load Amps 7 Amps
Saw Dimensions
Saw Length - in (mm) 18.11" (460mm)
Saw Width - in (mm) 14.17" (360mm)
Saw Height - in (mm) 11-7/16" (290)
Weight Crated - lbs (kg) 40 lbs (18 kg)
Weight – uncrated - lbs (kg) 35 lbs (15.9 kg)
Weight Of Machine With Water Pan Full
41 lbs (19 kg)
Sound pressure
2
72 dB (A) (ISO EN 11201)
Sound power
2
80 dB (A) (ISO EN 3744)
* = Data Provided by Motor/Engine Manufacturer,
1
= Open Table Top Design Allows Unlimited Material Sizes, 2) The sound measures
have been made following pr EN 12638, Annex A;
2.4 Items Includes With The CTC701
9 Carrying Case
9 Guide-A-Cut
9 Small Phillips Head Screw Driver
9 Blade Shaft Wrenches: 19mm Wrench and Spanner Wrench
9 Norton Continuous Rim Diamond Blade for Cutting Tile
3. Assembly
The machine is delivered fully equipped. It is ready for operation after assembling the
diamond blade, the blade guard and the guide-a-cut, and connection to the appropriate
power supply.