Owner`s manual

29
IV. PARTS LIST SECTION
A. Ordering Information
1. List model number and serial number of machine.
2. List part number and serial number of part not the item number.
3. Wherever alternate parts are shown due to product improvement, inspect
the part you have and provide additional description as necessary.
4. Specify mode of shipping desired, such as, parcel post, truck, U.P.S., best
way, etc.
For the nearest Norton Clipper distributor call 254-918-2310
Common Replacement Parts
Description Part No UPC No
BELT 3VX300 (4)
BLADE SHAFT NUT RIGHT SIDE
(LEFT HAND THREADS)
227156 70184673903
BLADE SHAFT NUT LEFT SIDE
(RIGHT HAND THREADS)
227191 70184674346
TIGHT COLLAR RIGHT SIDE
(LEFT HAND THREADS)
227159 70184673904
TIGHT COLLAR LEFT SIDE (RIGHT HAND THREADS) 227190 70184674352
LOOSE COLLAR OUTER FLANGE W/ Drive Pin 227247 70184674082
PIN DRIVE (GROOVED) 3/8X1 227154 70184674556
BEARING PIL BLK 1-1/4 106218 70184650306
WHEEL 6 X 2 X 3/4 W/ROLLER BEARING 238005 70184626921
WHEEL 5 X 2 X 3/4 W/ROLLER BEARING 238004 70184626920
WRENCH OPEN END 1-1/4 238212 70184628071
WRENCH OPEN END 1-1/2 238213 70184628074
NOTE: All Parts Are Sold As Individual (each) Unless Noted Otherwise
Blades Use Only Norton Diamond Blades. Contact your local Norton
Clipper Distributor or our Customer Service at 254-918-2310 for the best blade
for the application.
All parts are designated as either Service Parts (S) or Wear Parts (W) in the
Type column in the parts listing. Wear parts are worn out through normal use of
the machine. The wear period depends on the intensity of use of the machine,
handling, and maintenance of the machine. Wear parts must be serviced and
eventually changed following the indications of the manufacturer. Any wear due
to normal use of the machine will not be considered as a case of warranty for
items designated as Wear Parts (W). For best performance and life Genuine
Norton Clipper replacement parts should always be used. Changes to part
specifications, are subject to change with out notice..