User's Manual

8
1. Connect your HCS-100 with MP3 player.
2. Power off the HCS-100 by pressing for 5 s (The
connection will drop with MP3 player).
3. Put your HCS-100 in standby mode and connect/pair to
mobile phone by headset/hands-free profiles.
4. Press for once shortly.
5. MP3 player is paired with A2DP and AVRCP and the mobile
phone is paired with the headset/hands-free profile(s).
Auto reconnection
1. When the headset turns off while connecting
The headset will be automatically reconnected without the
paring process when power is supplied. If the headset was
connected in multiconnection, then it will be multi connected.
(the mobile phone connected previously should be within 10
m from the headset).
2. Out of range
The headset will be automatically reconnected when it is
brought back within a 10 m range of the phone within 3 min.
Note that if the headset is out of range in multiconnection
mode, then it will not be automatically reconnected. Please
connect it refer to the next “Connection with the recently
connected device”.
How to use