User manual

7
Controls Functionality
Handset ♦ Used for normal telephone functionality.
LCD display ♦ Displays system status and user information.
START ♦ Restarts network access via ADSL, DHCP, Static IP mode.
MUTE ♦ Deactivates your handset microphone.
MENU
♦ Initial state: activates main menu.
♦ Character input state: changes input mode
(upper case/ lower case/ numeric/ symbolic).
♦ Phonebook lookup state: displays edit menu.
♦ Message check state: plays previous message.
CLEAR
♦ Character input state : same as backspace
♦ Phonebook delete menu : deletes phonebook.
♦ Message check state : deletes current message and plays the
next message.
♦ All the other states : activates previous level menu.
ENTER
♦ Activates inverted menu item.
♦ Confirms input of character string or numeric constants.
♦ Message check state: plays next message
TRF/FLASH
♦ Initiates call transfer.
♦ While you are dialing, you can re-dial using this button.
HOLD ♦ Holds current call and transmits hold signal to the held peer.
VOL(▲▼)
♦ During conversation: adjusts receiver volume.
♦ In ringer setting menu: adjusts ringer volume.
♦ During other menu manipulation: navigates among menu
items.
Button
Part A
END
♦ Returns to main menu.
♦ During conversation: finishes call session.
AutoAnswer
♦ Toggles auto answer mode. If auto answer mode is enabled,
its LED is ON.
Message
♦ Plays received voice messages. If new message(s) arrived, its
LED flashes.
VoIP
♦ If VoIP call is valid, its LED is ON. If registration is failed or
VoIP call is invalid, its LED flashes.
SPEAKER ♦ Activates speaker phone mode.
Button
Part B
SEND ♦ Makes an outgoing call after phone number input.
Dial buttons
♦ Used for phone number or character input.
♦ Also used for direct selection of menu item.
Keison Products www.keison.co.uk [e-mail] Tel: [phone]