User manual

30
9. Firmware Upgrade
9.1. Firmware Upgrade by FTP
When your CP-100/100D is accessible by its IP address, you can upgrade its firmware by FTP, which
is the fastest firmware upgrading method. FTP cannot be used when your CP-100/100D is in abnormal
state or not connected to the network.
³ To get the latest version of firmware, please contact tech support at CLIPCOMM’s website
or send an e-mail to [e-mail].
The following example shows how a command line FTP client is used to upload a new firmware (“CP-
100/100D.fls”) to the CP-100/100D. Its IP address is 192.168.0.36. Enter “admin” as the user name
and type in the password that is set in the VoIP configuration web page of the CP-100/100D. The
default password is “0000.”The system will reboot automatically when upgrading the firmware by FTP
is completed.
C:\> ftp 192.168.0.36
Connected to 192.168.0.36.
220 FTP Server Ready
User (192.168.0.36:(none)): admin <Enter>
230 Logged in
ftp> bin
200 Type OK
ftp> put CP-100/100D.fls flash
200 Port command okay
150 Opening data connection for STOR (192.168.0.14,1161)
226 File received OK – 1053136 bytes in 10.640 sec
ftp: 1053136 bytes sent in 10.55Seconds 99.82Kbytes/sec.
9. Firmware U
pg
rade
Keison Products www.keison.co.uk [e-mail] Tel: [phone]