User manual

20
z H245 Tunneling: If enabled, CP-100/100D uses H.245 tunneling in making an outgoing call.
z Gatekeeper address: If “Use gatekeeper” is enabled, the IP address of gatekeeper is set by
this tab.
z Skip GRQ: If “Skip GRQ” is enabled, CP-100/100D does not send GRQ to register.
z Gatekeeper Password: Password to register to gatekeeper
z Use H.323 ID: If enabled, CP-100/100D sets an H.323 ID in making an outgoing call.
z H.323 ID: An H.323 ID that can be used in gatekeeper registration.
z Use E.164 ID: If enabled, CP-100/100D sets an E.164 ID in making an outgoing call.
z E.164 ID: An E.323 ID that can be used in gatekeeper registration.
z Use dedicated gateway: if enabled, CP-100/100D always makes outgoing call via a
dedicated gateway. If the ‘Use gatekeeper’ field is enabled, this field is ignored.
z Dedicated gateway: IP address of the dedicated gateway.
z Use VAD: If enabled, CP-100/100D continuously monitors voice activity and does not send
voice data when it detects silence.
z Min Jitter Buffer Size: Minimum jitter buffer size for voice conversation.
z Max Jitter Buffer Size: Maximum jitter buffer size for voice conversation.
z Q.931 Port Configuration: You can set Q.931 port number manually if you want.
z RAS Configuration: You can set RAS port number manually if you want.
z H.245 Port Configuration: You can set H.245 port number manually if you want.
z RTP Port Base Configuration: You can set base port number for RTP base using this tab.
RTP port is increased per calls, and circulates between [RTP port base] and [RTP port base+3].
z Use NAT Traversal: If enabled, you can make and receive calls behind NAT.
z NAT Router IP : If you are using NAT traversal, you can set external IP address of NAT router.
5.6.2.3. SIP setting
If your CP-100/100Dis equipped with SIP firmware, you have to change the configuration related to the
URI and proxy server. Please inquire of the administrator about the specific parameters.
z Registrar Server: The address of registrar server. Usually, this address may be identical to
outbound proxy.
z Outbound Proxy: The address of where SIP packet is sent.
z Password: The password required for registration.
z Expiry Timer: The time to determine registration failure
z Proxy Port: Base port where outbound proxy receives CP-100/100D’s SIP packet.
z RTP Port: Base RTP port for voice packet streaming
z Local Port: Base SIP port where CP-100/100D sends and receives SIP packet.
z User ID: The user name or phone number which is used for SIP communication
z Display Name: The display name which is used for SIP communication
z Authentication ID: ID for registration.
Keison Products www.keison.co.uk [e-mail] Tel: [phone]