User manual

18
1: Disable
2: Unconditional
3: on Busy
4: on No Answer
In H.323 version, “3:on Busy” and “4:on No Answer” is not available.
③ Select “2:Forwarding No”. Enter the number where you want to forward incoming call.
³ Note: The settings are prioritized; 1) auto answering 2) call forwarding. That is, if you set on
auto answering, then you can’t use call forwarding.
5.5. Changing Password
① A default password of CP-100/100D is set as “0000.” We recommend that you change this
default password to prevent any unwanted access to your phone. To change the 4-digit password,
select MENUÆ”3:Phone Mgmnt”Æ“5:Change pwd.”
② Enter a new 4-digit password (numerical only).
③ Enter the new password again to confirm.
5.6. Internal Web Interface
You can configure and monitor your CP-100/100D using the internal Web interface. When the network
configuration of your CP-100/100D is completed and the CP-100/100D properly connects to your
network, you can access the internal Web interface of your CP-100/100D via following HTTP address
and port number:
http:// IP address of your CP-100/100D:1001
Enter “admin” as the User ID and “0000” as the password once the pop-up window appears.
5.6.1. System Information
z System Status: Displays current system status information regarding network and H.323/SIP.
z Technical Specification: Lists software version, serial number, MAC address, and other
detailed specifications.of CP-100/100D.
Keison Products www.keison.co.uk [e-mail] Tel: [phone]