User manual

10
③ Select “Yes” and press ENTER. Your CP-100/100D will automatically restart in DHCP client mode
after a few seconds.
5.1.3. ADSL Setting
① Select MENU Æ “3: Phone Mgmnt”Æ “1: Set Network” Æ “2:Change Config”.
1: Static IP
2: DHCP
3: ADSL
② Select “3: ADSL” if you want to configure your CP-100/100D in ADSL environment.
1: ADSL ID
2: ADSL Password
3: Service Provider
4: Connect ADSL
③ Enter your ADSL ID and password respectively using sub menu 1 and 2.
Enter ADSL ID [ a ]
myid_
④ Select a specific ADSL service provider using sub menu 3.
⑤ Select “4:Connect ADSL” and press ENTER. Your CP-100/100D will automatically restart in
ADSL mode. In SIP version, you should restart system manually.
⑥ When ADSL connection fails, press START button to try again.
5.1.4. Viewing Current IP Setting
① Select MENU Æ “3: Phone Mgmnt”Æ “1: Set Network”.
1: Current Info
2: Change Config
② ② Select “1:Current Info”. Then current network configuration status will be displayed.
Keison Products www.keison.co.uk [e-mail] Tel: [phone]