Specifications

9
Spark-e-Mate
Installation Testing Made Easy
Forget about carrying around
different testers for various
applications. The Clipsal Spark-e-
Mate has you tested and covered.
One instrument does it all!
The Clipsal Spark-e-Mate
performs comprehensive electrical
wiring tests relevant to Australian
and New Zealand Standards, from
a single socket outlet, without the
need for a separate Earth. Put it to
the test… every test.
Clipsal’s Spark-e-Mate
can test for:
■ Earth continuity
■ Insulation resistance
■ Polarity
■ Correct circuit connections
■ Earth fault loop impedance
(without tripping RCDs)
■ Residual current device (Earth
leakage detector or Safety
Switch)
■ Extension leads and power
accessories
■ Supply voltage
■ Mains frequency.
Features
■ Three-pin plug for socket
testing and test probes for
lighting.
■ Dimensions: 220mm x
110mm x 45mm (HxWxD).
■ Thermal plastic rubber
protective cover.
■ Complies with AS/NZS
Standards: AS/NZS3300,
AS/NZS3017, AS/NZS3260
(AS/NZS60950), AS/
NZS3100, AS/NZS3350.1,
AS/NZS61010.1 Category III.
Catalogue Numbers
493
Spark-e-Mate Multiple Function
Tester- Earth, Insulation, Circuit,
RCD’S, Voltage, Frequency-
240V 50Hz
493L
Test Lead with Clips and Probes
493
493L
Queensland Meter Box
Meter Boxes that make the Grade
Due to recent wiring regulations
implemented by the Queensland
Electricity Connection and
Metering Manual, Clipsal have
made some important new
changes to the 230DRAQ
meter boxes.
These include a meter isolation
lock off facility (in the “off” position
only) with sealing facilities for
single customer installations,
specifically designed to meet
the new Queensland Electricity
Connection and Metering Manual
requirements (Section 6).
230DRAQ
230MI
Catalogue Numbers
230DRAQ
21 Module Switchboard and Meter
Box, H680 x W470 x D280mm
230DRAQTP
21 Module Switchboard and Meter
Box (suitable for temporary supply
AS/NZS3012 compliant), H680 x
W470 x D280mm
230MI
Meter Isolator Enclosure. Pad
lockable less MCB insulated panel
mounting