Single Channel Mini DVR with Built-In Camera RP1
The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Table of Contents Warning Precautions Components Features Installation Operation • Button Functions • Initiation • Live View • Recording View • Playback View System Settings • Main Menu • Date / Time Setup • Motion Setup • Manual Record • Schedule Record • SD-Card • System Status • Power On Setup • Factory Settings Troubleshooting Specifications Possible Recording Time Sales: 1-800-447-3306 1 2 4 5 6 7 7 9 10 11 12 15 15 16 16 17 18 21 21 22 22 23 24 25 Support: 1-800-549-6393 www.clintonelectronics.
Warning The camera requires periodic inspection. Contact an authorised technician to carry out the inspection. Stop using your camera when you find it malfunctioning. If the camera emits smoke or is unusually hot for a long period, a fire may be caused. Do not install the camera on a surface that can not support it. If the camera is installed on an inappropriate surface, it may fall and cause injury. Do not hold plug with wet hands. It could cause an electric shock. Do not disassemble the camera.
Precautions Do not install the camera in extreme temperature conditions. Do not install or use the camera in an environment where the humidity is high. Only use the camera under conditions where temperatures are between 41°F ~ 104°F. Be especially careful to provide ventilation when operating under high temperatures. It can cause the image quality to be poor. Do not install the camera under unstable lighting conditions. Do not touch the front lens of the camera.
Do not drop the camera or subject it to physical shocks. It can cause malfunctions to occur. Do not expose the camera to rain or spill beverage on it. If it gets wet, wipe it dry immediately. Liquids can contain minerals that corrode the electronic components. Never keep the camera pointed directly at strong light. It can damage the CCD. Do not expose the camera to radioactivity. If exposed to radioactivity the CCD will fail.
Components Sales: 1-800-447-3306 Support: 1-800-549-6393 www.clintonelectronics.
Features Single Channel Mini DVR with Built-In Camera • All-in-one solution for hidden surveillance: 1/3” SONY SUPER HAD CCD color camera and digital recorder in PIR housing. • High recording resolution (640 x 480 pixel). • Automatic picture improvement by Automatic White Balance (AWB) and Automatic Gain Control (AGC). • Manual and schedule planned recording (Motion / Continuous). • Simple searching by Date / Time. • Recording on a commercial SDHC-Card.
Installation Observe the following instructions for a correction installation. 1. Bracket Installation Guide: 2. Mounting the Mini Portable Security Recorder: 3. Video Output and Power Supply: Sales: 1-800-447-3306 Support: 1-800-549-6393 www.clintonelectronics.
Operation l Button Functions Top View No.
Operation continued l Button Functions Bottom View Back View Release back cover: slide cover down. No. (10) Name SD Card Slot Function SD card storage connection *Fast Flashing: SD-Card not inserted SD-Card capacity is reached SD-Card failure SD-Card write-protected SD-Card not inserted & playback activated *Solid Green: Recording activated WARNING! If LED is flashing very fast, press button to deactivate the alarm.
l Initiation 1. To turn the device ON / OFF: • Press and hold the power button for at least 5 seconds. 2. The default menu language is English. To change the languages: • Select item [POWER ON SETUP] in the main menu. Here you can change the language of the menu. 3. After successful start-up the recorder shows the live view. • If schedule recording has been programmed the recorder will automatically continue this schedule. • During recording the REC LED indicator is solid green “ON”. 4.
l Live View If the video output of the device is connected with a monitor, you can view the live images on the monitor. Thereby the following information is shown: No. Live View Function j Shows the current date and time.
l Recording View No. j Recording View Function Record Status: Device is recording data k Record Mode: Manual Record Motion Detection Schedule Record l Record Storage Mode Status: Overwrite is activated There are three different ways to start recording: Symbol Press [ button. 11 Mode Start Recording Function Manual Press [ Continuous Recording Continuous recording has been enabled Motion Detection As soon as recorder detects motion, the device starts recording.
l Recording View continued To continue the recording, proceed as follows: Mode Continue Recording Function Manual Press [ Continuous Recording, Motion Detection Exit playback or menu During a recording the [ ] button again ] symbol is shown. l Playback View To start playback, you can decide between two different modes: Sales: 1-800-447-3306 Support: 1-800-549-6393 www.clintonelectronics.
l Playback View continued Normal Playback During live view press the playback/pause [ Symbol ] button to start normal playback: Normal Playback Function : Normal playback speed : During the normal playback press [ ] or [ ] button to rewind or fast forward. By pressing in the same direction again you raise the search speed (Speed: x2/ x4/ x8/ x16/ x32). Press [ ] button to playback at normal speed. : During playback, press [ ] button to pause playback and press again to return to playback status.
No. Event List Function j The file view shows the date of recording and the number of files belonging to the recording. To navigate press the direction button up or down and press [ ] button to playback. To return to the selection mode press the stop button. k Shows the number of pages. l Record Mode: Manual Record Motion Detection Schedule Record m Press the direction button right or left in order to show the first picture of the event. n Shows the time of the recording.
System Settings l Main Menu j In the top right corner the menu level is shown: First level (main menu) Second level Third level − Press [ ] or [ ] buttons to navigate. − To confirm or select press [ 15 ] button. − Press [ ] or [ − Press [ ] button to leave the menu. Sales: 1-800-447-3306 ] buttons to change the value. Support: 1-800-549-6393 www.clintonelectronics.
l Date/Time Setup • Date Format : Here you can change the way the date is displayed. • Date/Time Adjustment : Here you can change the date and time. l Motion Setup Set MD Area The motion detection area is split up into 16 x 12 cells. Cells which are marked to detect motion are displayed in red. Sales: 1-800-447-3306 Support: 1-800-549-6393 www.clintonelectronics.
l Motion Setup continued In order to navigate use [ ] buttons and confirm by pressing [ button. Press [ ] playback button in order to change the editing mode. • • • • • CELL EDIT : DEL BLOCK : DEL ALL : ADD BLOCK : ADD ALL : Here you can (de-) activate every single cell. Here you can deactivate a complete block of cells. Here you can deactivate all cells at once. Here you can activate a complete block of cells. Here you can activate all cells at once.
l Manual Record continued − VIDEO SIZE / FRAME RATE: Here you can change the video size and frame rate for the manual recording. Video Size Max. Frame Rate 320 x 240 640 x 480 30 fps 12 fps − QUALITY: Here you can choose between three recording qualities: • High • Medium • Low l Schedule Record Here you can see a short summary of the settings for motion and continuous recording. No.
Schedule Setup No. Mode Schedule Setup Function j SCHEDULE Recording ON / OFF (default value is OFF) k 00 - 23 With [ hours. ] and [ Press [ ] or [ ] buttons you can navigate between the ] to change the recording types. : Motion detection : Continuous recording : All modes active : No mode active Motion Record Here you can change the settings for the motion detection. 19 Sales: 1-800-447-3306 Support: 1-800-549-6393 www.clintonelectronics.
l Motion Record continued − Motion record functions: • VIDEO SIZE : Here you can set the recording resolution. • FRAME RATE : Here you can set up how many fps to be recorded. • QUALITY : Here you can set the recording quality. • DURATION : Here you can set how long the device shall record after motion has been detected. Continue Record Here you can change the settings for the continuous recording. − Continuous record functions: • VIDEO SIZE : Here you can set the recording resolution.
l SD-Card − SD-Card functions: • DISK TOTAL : Shows the total capacity of the inserted SD-Card. • DISK REMAIN : Shows the remaining capacity of the inserted SD-Card. • MAX FILE SIZE : Here you can set the max. file size (3 ~ 100 MB) of a recording. If the size is reached a new file is created. • CARD FULL : Here you can choose what happens when the total capacity of the SD-Card is reached: - STOP : The recording is stopped. - LOOP : The recording continues.
l Power on Setup − Power On Functions: • LANGUAGE : Here you can set the OSD menu language. • COMPOSITE : Here the video standard for the video output is shown. l Factory Settings Here you can reset all settings, except Date and Time, to factory default. − Press [ ] button to reset to factory default. − To back up, press [ menu. Sales: 1-800-447-3306 ] button and return to the main Support: 1-800-549-6393 www.clintonelectronics.
Troubleshooting If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact Clinton Electronics Technical Support at 1-800-549-6393 or 815-633-1444. Problem Solution Why is the power button not functioning? • The battery power is empty, battery needs to be recharged. • Press the power button for 5 seconds to power-on the device. After 2-3 seconds of initialization, the image will be displayed.
Specifications Camera CE-RP1 Image Sensor 1/3” SONY (Super HAD) CCD Resolution 420 TV Lines Lens 3.7mm / Pin Hole Lens / F2.0 Horizontal Viewing Angle 71° Minimum Illumination 0.
Possible Recording Time Frame Rate Resolution 1GB SD-Card (example) 25 Quality Sales: 1-800-447-3306 High 30 fps at 320x240 12 fps at 640x480 150 Min. 155 Min. Medium 380 Min. 280 Min. Low 600 Min. 340 Min. Support: 1-800-549-6393 www.clintonelectronics.
MEMO
v.04.20.