High Speed Dome Camera CE-PTZ10X User Manual 0X CE-PTZ1 01> rd 34< boa VERm Key e t Sys U MEN MUX DVR N/ US / RS485+ RS485- ire) (Green W ) Wire ( Yellow RUN / AUX T/ SE/ CLOEL D PR D/ / CLINTON Electronics 6701 Clinton Road Loves Park, IL 61111 NEX EV/ HOL / RS-485 ptor da ybo(Nao:rd14A375) 2/ + RS485 + DC12V + DC12V Power N 1 www.clintonelectronics.com CLR 4 v.04.05.10 9 ER ENT 7 rd Keyboa E/ TELDn Pg MO 8 RJ45 AR/ NEIC P .F 3 1.800.447.3306 Sales 2 CAM 1.800.
Table of Contents Intro Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Contents, Installation & Set-up, Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Precautions & Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7 Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Introduction Congratulations on the purchase of your new High Speed Dome Camera. This camera is a full-functional, high-speed pan-tilt-zoom camera in a compact size, enclosed in a dome housing. It is designed for professional surveillance applications, and can be integrated into any surveillance system.
PACKAGE CONTENTS DC 24VAC Power Supply CE-PTZ10x Camera Set Screw (+1 extra) Wall Mount User Manual Installation and Set up Unpacking your camera Your PTZ camera comes with a power supply, as well as a wall mount and a small screw to attach the camera to the wall mount (plus one extra screw). Carefully remove the contents from it’s packing and set on a firm surface. Save the packing in case of future service requirements or transportation needs.
Precautions For all service or installation needs, please refer to qualified service personnel or system installers Do not attempt to disassemble the device To prevent electric shock, do not remove screws or cover. There are no user-serviceable parts inside. Contact qualified service personnel for maintenance Handle the device with care Do not strike or shake, as this may damage the device. It should be protected against extreme pressure, vibration, and humidity during transportation and storage.
WARNING TO REDUCE THE RISK OF ELECTRIC SHOCK OR FIRE, SO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECTS THROUGH THE VENTILATION GRILLS OR OTHER OPENINGS ON THE EQUIPMENT. This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.
Installation Safety Instructions before starting - Do not install and operate this appliance in a flammable and explosive environment. - Make sure that the installation is done according to the local electricity safety regulations of your country. - Before installation and maintenance, make sure that the appliance is disconnected from the power source. - Handle the device during installation carefully. Falls or extreme vibration may cause irreparable damages or void the warranty.
Installation Connection Schematic The high speed dome camera series can be connected to various optional accessories through the standard connector types, which simplify the cable handling and avoids possible errors. All accessories are tested for maximum compatibility and best performance. This dome has jumperless design, meaning protocol, baud-rate, and ID are to be set in OSD. The protocol can be automatically recognized by the system.
Installation Star-ConnectionThe star-form connection is most commonly used. It enables the connection of different dome cameras with longer cable runs. It is recommended to use an RS485 distributor to ensure the telemetric data transmission. RS 485+ RS 485- > 4<01 oard VER3 Keyb em Syst The advantage of the star-connection is that every channel can work independently and can take a cable length up to 3,280 feet (1000 meters) (depending on cable quality).
Basic OperationInitial Screen and Self-Testing After powered on, the dome starts the self-testing by slowly rotating and panning. After the selftest completes the initial information will be displayed on the screen. S/N:XXXXXXXXXXXXXXX CLINTON V2.
INITIAL INFO -----------------S/N: XXXXXXXXXXXXXXX CLINTON V2.42 PROTOCOL: CLINTON DOME ADDRESS: 001 COMM 9600, N, 8, 1 BACK EXIT DISPLAY SETUP --------------DOME LABEL PRESET LABEL ZOOM LABEL ZONE LABEL DIRECTION LABEL TEMPERATURE LABEL TIME LABEL DATE LABEL BACK EXIT DOME LABEL PRESET LABEL INITIAL INFO Shows the serial number, current firmware version and other settings.
CLEAR -----------------CLEAR ALL ZONES CLEAR ALL PRESETS CLEAR ALL PATTERNS CLEAR ALL TOURS CLEAR ALL WINDOWS FACTORY DEFAULTS RESTART BACK EXIT CLEAR The CLEAR function resets the stored settings and controls back to factory default. *NOTE: Pressing Right with the joystick will activate the following functions. There are no sub menus to these functions. You cannot undo the action.
CLOCK SETTING -----------------TIME 13:44:30 DATE 10/03/31 BACK EXIT CLOCK SETTING The system is equipped with a RTC (Real-Time Clock) and can be used to display the date/time information on the screen, or operated via schedule (see pg.18; “Time Running”). In order to use this function correctly, you must first set up the date and time. [TIME]: Change the time setting. Displayed as 24hr clock. [DATE]: Change the date setting. Displayed as Year/Month/Day.
Function Settings MAIN MENU -----------------SYSTEM SETTING --> CAMERA SETTING --> FUNCTION SETTING --> WINDOW BLANKING --> EXIT FUNCTION SETTING -----------------PRESETS --> SCAN --> PATTERNS --> TOUR --> ZONES --> TIME RUNNING --> BACK EXIT PRESETS -----------------PRESET NUMBER 001 SET PRESET --> SHOW PRESET CLEAR PRESET EDIT PRESET LABEL --> BACK EXIT In the function settings, user can setup the automated PTZ functions, such as preset position, tours, scan, etc.
SCAN -----------------SCAN NUMBER 01 SCAN SPEED 50 SET LEFT LIMIT --> SET RIGHT LIMIT --> CLEAR SCAN RUN SCAN EDIT SCAN LABEL --> BACK EXIT SCAN A Scan-Tour is an automated Pan movement between 2 defined positions with speed setting. The scan will move from the defined Left limit, to the defined Right limit in a straight path, and back again. If you wish to have your PTZ follow a more advanced path, use one of the next two selections: “PATTERN”, or “TOUR”.
TOUR -----------------TOUR NUMBER 001 EDIT TOUR --> RUN TOUR CLEAR TOUR BACK EXIT TOUR A Tour is an automated cruising through selected preset positions with individual speed settings and dwell times. This PTZ supports up to 4 tours with 24 positions each. *NOTE: Before a tour can be properly set up, you must first define your preset points you wish to include in the tour (see page 16 “Presets”).
TIME RUNNING -----------------TIME CHANNEL 1 START TIME 00:00 END TIME 00:00 RUNNING NONE BACK EXIT TIME RUNNING The time running function is a scheduled start for predefined action, such as preset tour, scan tour, etc. This PTZ supports up to 4 schedules.
OSD Map OSD MENU INDEX SYSTEM SETTING -----------------EDIT DOME LABEL --> INITIAL INFO --> DISPLAY SETUP --> MOTION --> CLEAR --> PASSWORD SETUP --> CLOCK SETTING --> COMM SETTING --> BACK EXIT EDIT DOME LABEL -----------------LABEL: DOME 1 BACK EXIT INITIAL INFO -----------------S/N: XXXXXXXXXXXXXXX CLINTON V2.
Specifications Model CE-PTZ10X Signal Format PAL / NTSC Scanning Progressive Image Sensor 1/4 inch Ex-View CCD H. Resolution 540 TVL Viewing Angle 46.0 º (Wide end) 4.6 º (Tele end) Zoom 10 x Optical / 12 x Digital Min. Illumination 1.0Lx (typical) - (F1.8, 50 IRE) Focus Auto / Manual White Balance Auto / Manual (ATW, Indoor, Outdoor, One Push WB, Manual WB) Shutter Speed 1 to 1/10,000 Sec.
v.01.25.
