CLINTON Electronics 6701 Clinton Road Loves Park, IL 61111 1.800.447.3306 Sales 1.800.549.6393 Support 1.800.633.8712 Fax www.clintonelectronics.
DVR AV REC MENU Exit 2 16 GB SD Card GB SD Card Alarm SD-Audio Motion Chime 1 ON 2 3 4 2 16 GB SD Card OSD 2 16 GB SD Card GB GB SD Card 912-F8125-0001 SD Card Alarm SD-Audio Alarm SD-Audio Motion Motion Chime 1 ON 2 3 4 Chime 1 ON WHEN SD CARD IS INSERTED, WHEN SD CARD IS INSERTED, YOU MUST POWER CYCLE. YOU MUST POWER CYCLE.
POWER POWER POWER POWER AUTO UP DOWN UP AUTO AUTO DOWN UP DOWN AUTO UP DOWN MENU MENU MENU MENU POWER 5 AUTO UP DOWN MENU
DVR AV REC MENU OSD Exit SOURCE 912-F8125-0001 6
POWER POWER 9 AUTO UP DOWN MENU AUTO UP DOWN MENU
DVR AV REC MENU OSD Exit SOURCE 912-F8125-0001 10
9 1 2 3 4 5 6 7 8 9 11
DVR AV REC DVR DVR AV AV MENU Exit MENU Exit DVR Exit REC REC OSD DVR OSD REC OSD AV DVR DVR DVR AV AV MENU Exit Exit MENU DVR REC MENU AV REC REC AV MENU MENU OSD Exit Exit OSD REC OSD Exit REC MENU OSD OSD MENU Exit DVR AV DVR AV REC REC 1 MENU MENU Exit OSD 2 3 4 5 12 Exit OSD AV OSD
1 DVR AV REC DVR MENU AV Exit OSD MENU REC Exit MENU Exit Exit REC AV DVR REC OSD REC REC MENU MENU MENU OSD AV AV Exit OSD OSD OSD DVR DVR Exit DVR 13 AV
DVR AV DVR DVR AV AV DVR REC AV DVR REC MENU MENU OSD Exit Exit OSD MENU Exit Exit REC MENU OSD AV REC REC MENU OSD Exit OSD MENU REC Exit DVR DVR DVR AV REC MENU Exit Exit 14 AV REC MENU OSD OSD OSD AV
DVR AV REC DVR DVR AV AV MENU Exit Exit REC MENU OSD Exit OSD DVR OSD MENU Exit MENU REC OSD 16 REC AV
DVR AV DVR REC AV MENU OSD Exit REC MENU Exit OSD 18
POWER AUTO UP DOWN MENU SETUP Menu LENS • DC EXPOSURE • BRIGHTNESS • SENS-UP WHITE BALANCE • ATW • MANUAL • OUTDOOR • AWC SET SSDR • OFF • ON BACKLIGHT • OFF • BLC DNR3 • OFF DAY / NIGHT • AUTO • EXTERN • CO
Notes • An item with the icon also has sub menus. To select a sub menu, select an item with the icon and press the SET button. • An item with the - - - icon has no sub-menus available for selection. Notes • If color rolling occurs when using a DC lens, set Shutter to FLK. • Some lenses may not work properly, depending on the setting of the BRIGHTNESS LEVEL.
Notes • When using a DC lens, set the shutter mode to A.FLK if color rolling occurs. • When the SHUTTER is set to ESC after selecting Internal Synchronization Type, the picture may become unstable if the camera faces a bright fluorescent light. Therefore, take care when choosing the installation position. • When the SHUTTER is set to MANUAL or A.FLK mode, SENS-UP will be disabled.
Notes • If you press the SET button in ‘AUTO’ mode, you can adjust brightness by increasing or decreasing the shutter speed. (x2 ~ x512) • Note that the higher the zoom level, the brighter the screen, but the more likely it is that an afterimage will appear. • Although noise, spots, and whitish symptoms may occur in SENS-UP operation when the zoom level is increased, this is normal. Notes • White Balance may not work properly under the following conditions. In this case select the AWC mode.
24
Notes • For effective license plate observation, it needs minimum illumination and fast shutter speed more than 1/200sec. • Because there can be a difference in the effectiveness of HLC according to the amount of light area in the screen, optimize the installation angle for the best HLC performance. • When dark, the HLC is only activated when a bright light exceeding a specific size in NIGHT ONLY mode.
Notes • You cannot set the DNR to ‘ON’ or ‘OFF’ when the AGC mode of the EXPOSURE menu is ‘OFF’. • When adjusting the noise reduction level in DNR mode, remember that the higher the level is set, the greater the reduction in noise level, as will the brightness of the image.
Notes • When using a Video Auto Iris Lens, if you set the lens level to low, automatic switching between Color and Black & White may not occur. • When AGC in the EXPOSURE menu is ‘OFF’, ‘ --- “ mode operates as like selecting ‘COLOR’ mode, and ‘AUTO’ mode can not be selected.
Notes • As the DIS function uses the digital zoom the camera’s resolution will decrease. • DIS doesn’t operate when background illumination is too low. • DIS doesn’t operate when object pattern is monotonic (ie. sky or white wall).
Notes • When the V-REV or H-REV mode is enabled, the text on the screen does not flip. •If you increase the SHARPNESS level too high, the picture may become distorted or noise may appear.
Notes • When the CAM TITLE menu is ‘OFF’, no title will be displayed on the monitor screen even if you enter one. • Only English is available is this mode. • If you move the cursor to CLR and press the SET button, all the letters are deleted. To edit a letter, change the cursor to the bottom left arrow and press the SET button. Move the cursor over the letter to be edited, move the cursor to the letter to be inserted and then press the SET button.
Notes • When using AC power at 60Hz frequency, you can use the L/L type synchronization. • When the power is DC 12V, the SYNC menu is fixed to the ‘INT’ mode.
32
33
If you have trouble operating your device, refer to the following table. If the guidelines do not enable you to solve the problem, contact Clinton Electronics Technical Support at 1-800-549-6393 or 815-633-1444. Problem Nothing appears on the screen. Solution • Check the power connection. • Check the video signal line connection. • Check the Brightness of Auto Iris lens. • Press the POWER button on your remote control. • Check to ensure the proper voltage is applied to the display.
Problem The MOTION DETECTION function is not working. Solution • Check if ‘MOTION DETECTION’ mode is turned on. • Check if the MD LEVEL is too low. • Check the setting of the MD AREA. Colors are not quite right. • Check the ‘WHITE BAL’ setting. The screen is flickering. • Check if the camera is facing directly into sunlight or fluorescent light. L/L mode isn’t able to be selected. • Have you connected your camera to DC power source? Connect it to AC power source. L/L mode is not available.