Specifications

MOTION SETUP

**To record motion, the following parameters must be set**

In the RECORD SETUP Menu, the RECORD MOTION selection must be

set to the ON position, and the RECORD START selection must be set to the OFF

position.

In the MOTION SETUP Menu, The MOTION FUNCTION selection must

be set to the ON position, and the MOTION ACTIVE selection must be set to ON

for each channel requiring motion to be recorded.

1 Section 1 Block

Adjacent sections

= 1 Block

**MOTION FUNCTION: all channels ON/OFF

**CHANNEL NUMBER: 1 ~ 16

1. DETECT NUMBER: Number of sections that will activate motion. 1 ~ 32

2. SENSITIVITY: Adjust motion Detection Sensitivity. 1 ~ 32

1= Lowest sensitivity, 32= Highest sensitivity

3. VELOCITY: Adjusts speed of motion sensitivity for slow movement.

1=slow moving objects not detected, 32=all movement

detected.

4. MOTION ACTIVE: Individual channel motion ON/OFF

5.RECORD DURATION: 0 ~ 999 SEC

6.RELAY DURATION: 0 ~ 999 SEC

>MOTION AREA SETUP<

>MOTION RELAY SETUP<