User guide

How to get great stereo sound using two
FREYA speakers
PAIRING TWO FREYA’S
4. Now your two FREYA speakers will
quickly communicate and soon say
”Your Device is now connected” to tell
you that Stereo Pairing is OK. You will
now see a blue LED on both speakers
that indicate 2 FREYA’s are connected in
stereo.
Note: If you want to use your FREYA
speakers as standalone speakers (mono
speakers) then you must un-set the
stereo pairing. Simply press once on
one of the ”Stereo Pairing” buttons on
either of your FREYA’s.
Note 2: If you permanently want to
remove the stereo pairing. Then you
must press and hold PREV and NEXT
simultaniously for 4 seconds to clear all
pairing data from memory. FREYA will
go to standby after this process.
Continued:
12
Hold for 4 secs.