Model PM Series Three Axis Mills PM3000 PM2000 Features Setup & Operation Technical Data CLIMAX Portable Machine Tools, Inc.
Features Climax's PM Series 3-axis portable milling machines provide precise and versatile on-the-job milling capabilities. They are designed to be attached either to the work piece or to a fabricated frame beside it. Downtime savings will pay for the machine in a short time. Cross travel (top slide): • 8-inch (203 mm) • Hand-fed with a crank or power-fed with your 3/8 inch drill. • All gears and drives are permanently lubricated and sealed to allow operation in any position.
Applications Removable hand crank Vertical adjusting screw with zeroing type dial in .001 increments Manual feed (cross slide) Triple gear reduction Stud for external power feed source (cross slide) Power feed Precision machined dovetail ways Adjustable feed stop Manual feed (x-axis) Adjustable quill clamp Model PM2000 Standard 3/4" Weldon type spindle A Wide Variety of Applications The Climax PM Series are especially useful for milling large cumbersome parts.
Setup and Operation The PM Series is designed to meet the requirements of a variety of applications and can be mounted in any position the job calls for - even upside down. Electronic speed control provides reduced spindle speeds for harder materials. Gear box, spindle, quill, and vertical adjusting screw assembly may be removed as a unit to sharpen or replace the end mill.
PM Technical Information Specifications (Inches/mm) Specifications subject to change without notice. For precision dimensions consult your factory representative. MACHINE SPECIFICATIONS: PM2000/PM2000-B Overall length (w/o feed assembly): PM3000/PM3000-B PM4000/PM4000-B 36.85 (935.99) 64.85 (1672.99) 94.85 (2409.19)* 13.22 (335.79) 13.22 (335.79) 13.22 (335.79) 20.22 (513.59) 20.22 (513.59) 20.22 (513.59) Overall height (std mach) Minimum: Maximum: 13.6 (345.4) 16.6 (421.6) 13.6 (345.4) 16.
PM Operational Dimensions 10.18 (258.57) Model Dim. A Long. Travel Dim. B Bed Length No. of Dim. C Mtg Holes Hole Spacing PM2000 20.0 (508.0) 29.0 (736.6) 6 10. (2 ) PM3000 49.0 (1244.6) 58.0 (1473.2) 12 10.0 (254.0) PM4000 78.0 (1981.2) 87.0 (2209.8) 18 .0 (25 ) 8.69 (220.73) 4.0 (101.6) .56 (14.22) dia. Spindle CL 13.6 (345.4) min 16.6 (421.6) max 3.0 (76.2) vert. travel 3.55 (90.17) 8.0 (203.2) .85 (21.59) travel 13.00 (330.2) min 21.00 (533.4) max 2.13 (54.1) 1.
PM Series Components Electric power feed assembly Vertical adjusting shaft ON/OFF switch Lifting eye Cross slide power feed assembly Cross slide assembly Adjusting knob Gear box assembly Spindle & quill assembly Stop rod assembly Quill clamping screws Vertical adjusting screw assembly Top slide assembly Bed assembly NO. DESCRIPTION PM2000 Portable Milling Machine NO.
CLIMAX Portable Machine Tools, Inc. 2712 E. Second St., P.O. Box 1210 Newberg, OR 97132-8210 U.S.A. Worldwide Tel. 503/538-2185 FAX 503/538-7600 Call toll free 800/333-8311 Visit our web page at http://www.cpmt.com 8 10/98 TD32-1M1098 PRINTED IN U.S.A.
