User's Manual

26
 APN Name for GPRS: Enter the name of an access point for GPRS. Please inquire your
SIM card service provider for your APN.
 User Name: User name is offered by your SIM card service provider. Please inquire your
service provider for your GPRS username. If no username is required, you may skip this
step.
 Password: Password is offered by your SIM card service provider. Please inquire your
service provider for your GPRS password. If no Password is required, you may skip this
step.
 IP Address: Central Monitoring Station server IP (000.000.000.000 to 255.255.255.255).
 Port Number: Central Monitoring Station server port number. (1 to 5 digits)
 Account Number: There are 2 account numbers available for GPRS/IP reporting. (4-10
digits)
4.4.1.3 Telephone
The “Telephone” tab is used to program the 1st - 4th Tel. numbers for reporting. The
account number(s) for the 1st - 4th Tel. numbers can also be programmed in this tab.
01# -04# Telephone Number Programming (01-04)
- Used to program the 1
st
- 4
th
Tel. numbers respectively.
- When entering the phone number, entering () represent a 3-sec. pause. (e.g. Switchboard
system, extension, etc.)
- Up to 20 digits including () are allowed for each telephone number.
11# -14# Account Number Programming (01-04):
- Set the account numbers for the 1
st
- 4
th
Tel. numbers used for Reporting respectively.
- In each field, key in an Account Number of 4 or 6 or 8 digits.
After editing and updating, click write to apply new settings.
4.4.1.4 Settings
The “Settings” tab allows you to program general configuration for CTC-1052-QT-DT35A.
Click “Write” when you have completed all settings to confirm.