User's Manual

21
CORRESPON-
DING DTMF
CHARACTER
COMMANDS
ITEM COMMAND EXAMPLE & USAGE DEFAULT
--- Password GPASS
PROG 8744 GPASS:65536
To set/change the password
Input 1 to 5 digits
No
password
---
Reset to
factory
default
FTSET PROG 8744 FTSET:YyS
---
Delete
Device
DEVDL
PROG 8744 DEVDL:SCMD
To delete devices learnt into the panel.
SCMD:
80 = delete All Devices.
--- Add Device DEVAD
PROG 8744 DEVAD:SCMD,ID
PROG 8744 DEVAD:94010203A001
To add devices into the panel
SCMD:
93 = add silent device
94 = add device
The devices are added sequentially into zone 1-20
ID: The 10-digit device ID (usually labelled on the back of
the device)
Firmware
Update
FWURL
PROG 8744 FWURL:URL,File_size
To update firmware
URL: Domain Name
File_Size: 00000~65536
Example:
PROG 8744 FWURL:HTTP://59.1.2.3:53000/hfs_server/
52dtab04a.bin,63488
Add a voice
prompt
V1URL
PROG 8744 V1URL:URL,File_Name,Account
To add a voice prompt
URL: Domain Name
File_Name:XX (For other language)
Account:01-99
Example:
PROG 8744 V1URL:HTTP://59.1.2.3:53000/hfs_server/,XX,01
Restart
system
SysRst Restart Panel System
<NOTE>
1. GPRS functions can only be programed via SMS messages, and the commands MUST be
sent in this sequence: Country code  IP address  Port number  GPRS/IP account
number  Access Point Name  User name  Password.
2. To set multiple SMS commands:
1. Ex: PROG_8744_TELN1:0227940559_TELN2:0227940559 (underline represents
<space>).
2. Maximum of 70 digits, including <space>, are allowed to be contained in a SMS
message sent by the cell phone.
3. SMS remote programming command can only be sent in the standby mode.
4. The SMS command is successfully set after getting a confirmation message.