Owner's manual

US Metric
Climax Portable Machining & Welding Systems Web site: climaxportable.com
Worldwide Phone: [phone] N. America Toll-Free: 1.800.333.8311 Fax: [phone] E-mail: [e-mail]
page 2
SPECIFICATIONS
All dimensions should be considered reference. Contact your Climax Representative for precision dimensions. Specifications are subject to change without notice. There are no systems or components
on this machine that are capable of producing hazardous EMC, UV or other radiation hazards. The machine does not use lasers nor does it create hazardous materials such as gasses or dust.
Boring and Facing Ranges
Boringdiameterrange,standardstackblockassembly: 18.1-80.1inches 459.7-2034.54mm
Boringdiameterrangeboring/facingarmassembly:
 with26inch(660.4)boring/facingarmassembly 28.9-43.7inches 734.1-1110.0mm
 with34inch(863.6)boring/facingarmassembly 36.5-59.7inches 927.1-1516.4mm
 with53inch(1346.2)boring/facingarmassembly 55.1-97.7inches 1399.5-2481.6mm
Facing diameter range, mechanical facing head assembly:
 with5,8,or12inch(127.0,203.2or304.8mm) 24.5-80inches 622.3-2032.0mm
mechanical facing head assemblies
(5 and 8 inch facing head assemblies have 8 inch stroke, 12 inch facing head assembly has 12 inch stroke)
Facing diameter range, slide arm assembly:
 with26inch(660.4)boring/facingarmassembly 23.1-43.7inches 586.7-1110.0mm
 with34inch(863.6)boring/facingarmassembly 23.1-59.7inches 586.7-1516.4mm
 with53inch(1346.2)boring/facingarmassembly 23.1-97.7inches 586.7-2481.6mm
Facingdiameterrange,boring/facingarmassembly(toolpostreversed): 
(“tool post reversed” refers to rotating the tool post so that the tool is on the bar side of the tool post.)
 with26inch(660.4)boring/facingarmassembly 14.0-17.4inches 355.6-442.0mm
 with34inch(863.6)boring/facingarmassembly 14.0-27.4inches 355.6-696.0mm
 with53inch(1346.2)boring/facingarmassembly 14.0-49.4inches 355.6-1254.8mm
Performance Data
RotationalDriveUnit(RDU)GearRatio:  20:1 10:1optional(2xfast,1/2torque)
Hydraulicmotorsizeaffectstorqueandspeed
 Theoreticalvaluescalculatedusinga25Hphydraulicpowerunitproducing2000psi(13790kPa)continuous,
 [normaloperationis1200psi(8270kPa)]andpumping15gpm(68l/min). 
Hydraulicmotorsizerange:  7.3-17.9in3 119.6-293.3cm3
BoringBarTorquewith20:1RDU:  3350-6068ft•lb 4542-8227.1N•m
 Maxboringrpmwith20:1RDU:  23.5-9.6rpm 23.5-9.6rpm
For example, with 11.3 in3 (185.3 cm3) hydraulic motor (43457):
 BoringBarTorquewith20:1RDU:  4783ft•lb 6484.9N•m
 Maxboringrpmwith20:1RDU:  15.1rpm 15.1rpm
FeedRateofmechanicalAxialFeedUnit(AFU): 0.003-0.030in/rev. 0.076-0.762mm/rev.
FeedRateofelectricAxialFeedUnit(AFU)In“slow”speed 0-0.3in/min. 0-7.62mm/min.
Measures
Shipping weight (estimated):
(machine with RDU, AFU, boring head set, tool carrier, tool kit, and hydraulic motor.)
 formachine(metalcrate)  5700lbs. 2585.5kg
 formachine(woodcrate)  5850lbs. 2653.5kg
 for1Bearing  1070lbs. 485.3kg
 forboringbar  14.5lbs/inch 2.6kg/cm
 15Hpor25HpHydraulicPowerUnit  1073lbs 486.7kg
Shipping dimensions:
 Machine,inwoodcrate,W,D,H  18.5x34x23.7inches 469.6x863.6x602mm
 Machine,insteelcrate,W,D,H  20x40x25inches 508x1016x635mm
 Bearing(eachbearingshippedseparately)W,D,H 40x40x12.7inches 1016x1016x322.6
 12foot(365.8cm)barW,D,H  24x18x152inches 609.6x457.2x3860.8mm
 15or25HpHydraulicPowerUnitW,D,H  64x30x50inches 1625.6x762x1270mm