Manual

US Metric
Climax Portable Machining & Welding Systems Web site: climaxportable.com
Worldwide Phone: [phone] N. America Toll-Free: 1.800.333.8311 Fax: [phone] E-mail: [e-mail]
page 2
SPECIFICATIONS
All dimensions should be considered reference. Contact your Climax Representative for precision dimensions. Specifications are subject to change without notice. There are no systems or components
on this machine that are capable of producing hazardous EMC, UV or other radiation hazards. The machine does not use lasers nor does it create hazardous materials such as gasses or dust.
Boring and Facing Ranges:
Boringdiameterrange,standardstackblockassembly: 8.8-38.0inches  223.5-965.2mm
Boring diameter range, boring/facing arm assembly:
 with18inch(457.2mm)boring/facingarm  19.9-32.1inches  505.5-815.3mm
 with23inch(584.2mm)boring/facingarm  24.8-42.1inches  629.9-1069.3mm
Recommended facing diameter range,
using mechanical facing head assy:  10.6-38.0inches  269.2-965.2mm
Facing diameter range, boring/facing arm assembly:
with 18 inch (457.2 mm) boring/facing arm 17.5 - 32.1 inches 444.5 - 815.3 mm
 with23inch(584.2mm)boring/facingarm  17.5-42.1inches  444.5-1069.3mm
Facing diameter range, boring/facing arm assembly, tool post reversed:
(“tool post reversed” refers to rotating the tool post so that the tool is on the bar side of the tool post.)
 with18inch(457.2mm)boring/facingarm  7.5-20.1inches  190.5-510.5mm
 with23inch(584.2mm)boring/facingarm  7.5-30.1inches  190.5-765.5mm
Performance Data
RotationalDriveUnit(RDU)gearratio:  6:1gearreduction  6:1gearreduction
Hydraulic motor size affects torque and speed
 Theoreticalvaluescalculatedusinga10Hphydraulicpowerunitproducing2000psi(13790kPa)continuous,
 [normaloperationis1200psi(8270kPa)]andpumping10gpm(37.9l/min).
Hydraulicmotorsizerange:  3.6-17.9in
3
  59.9-293.3cm
3
 BoringBarTorque:  470-1820ft•lb  637.2-2467.6N•m
Max boring rpm: 107 - 21 rpm 107 - 21 rpm
For example, with 11.3 in
3
(185.3 cm
3
) hydraulic motor (43457):
 BoringBarTorque:  1435ft•lb  1945.6N•m
Max boring rpm: 33 rpm 33 rpm
Feed Rate of mechanical Axial Feed Unit (AFU): 0.003 - 0.020 inches/rev 0.076-0.508mm/rev
FeedRateofelectricAxialFeedUnit(AFU):  0-0.3inches/min  0-7.62mm/min
Measures
Shipping Weights (estimated):
Machine includes Rotational Drive Unit (RDU), Axial Feed Unit (AFU),
boring head set, tool carrier, tool kit, and hydraulic motor.
 formachine(woodcrate)  640lbs   290.3kg
for machine (metal crate) 740 lbs 335.7 kg
 forone4armbearingassembly  160lbs   72.6kg
 forone3armbearingassembly  80lbs   36.3kg
for boring bar 2.5 lbs/inch 0.04 kg/mm
 for10HpHydraulicPowerUnit  500lbs   226.8kg
Shipping dimensions:
 Machine,inwoodcrate,W,D,H  18.5x34x24inches 469.9x863.6x609.6mm
Machine, in steel crate, W, D, H 43.3x29.5x22.5inches 1099.8x749.3x571.5mm
 Bearing(eachbearingshippedseparately)W,D,H 32x32x11inches 812.8x812.8x279.4mm
 12foot(3657.6mm)barW,D,H  11x13x154inches 279.4x330.2x3911.6mm
 10HpHydraulicPowerUnitW,D,H  27x33x48inches 685.8x838.2x1219.2mm