User's Manual

BUN-152

z Front View of BUN-152:

LED:

— When the Power is ON, the LED will stays on. It flashes moment when either

RPN-99 or LT-49’s signal has been received.

ANTENNA connector (TNC connector):

— It has two connectors for Antenna. During the installation, be sure to put both

Antennas upwards and then screw it towards the TNC connector.

z Rear View:

DC JACK: For connecting to 12V 500mA Power Adaptor

RS-232 CONNECTOR: Connects the RS-232 cable to PC.

Pin2: TXD

Pin3: RXD

Pin5: GOUND

Pin 1,4,5,6,7,8,9 : No Connection.

DC JACKRS-232

TXD

RXD

GND