User's Manual

3. Getting Started

Read this section of the manual to learn how to set up your MZ-1/8 Panel and program System

Settings over the Web page.

3.1. Hardware Installation for MZ-1/8

Step 1. Connect the Power Adaptor to a Wall Outlet and the other end to MZ-1/8. MZ-1/8 will

emit one short beep and Panel Status GREEN LED will turn ON.

Step 2. Connect the Ethernet cable as described below:

Step 2A: Plug-in the ethernet cable into the Internet jack on the Control Panel.

Step 2B: Plug-in the other end of the enclosed Internet cable into your Net Router port.

Step 2C: Once the Internet Set-up is successful, please leave the cable connected.

Step 3. Hardware installation for MZ-1/8 is now complete.

3.2. Software Installation for MZ-1/8

※

※※

※

THIS INSTALLATION IS ONLY REQUIRED FOR FIRST TIME USER

※

※※

※

1. RUNNING THE MZ-1/8 FINDER

To install the “Finder” software”

Step 1. Insert the supplied CD-ROM into your CD-ROM drive

Step 2. Find the Finder software in the CD-ROM

Step 3. Double click on the Finder to initiate the installation.

Step 5. Click “Change” to select the file folder, if no change is required; click “Next” to get

ready for the installation process.