User's Manual

39
 Greater Temp: The rule will be activated when the temperature rises above set value.
 Lower Temp: The rule will be activated when the temperature drops below set value.
 Timer: The rule will be activated when system reaches set time
Step3. Set the Execution Rule
 Switch Group: All Power Switches in selected group will be turned On/Off for set duration
according to your setting.
 Switch Zone: All Power Switches in selected zone will be turned On/Off for set duration
according to your setting.
 Request All Media: All PIR Camera/Video Camera in the alarm system will be requested
to take a picture or record a 10-second video clip.
Step4. Click “Submit” to confirm the rule change.
11. Firmware
This page is for you update your Control Panel firmware.
Step1. Select the firmware file in your computer
Step2. Click “Submit” to upload the firmware file to Control Panel.
Step3. It takes several minutes to complete update, do NOT power off during the process.
Step4. Once updating is complete, the Control Panel will reboot automatically.
12. Alarm Activation Table
For Alarm Activation by Events and Control Panel Responses, please refer to the following
table:
Control Panel Mode & Response Table
Device
DeviceDevice
Device Attribute
AttributeAttribute
Attribute Dis
DisDis
Disarmed
armedarmed
armed
Arm Mode
Arm ModeArm Mode
Arm Mode
Away /
Away / Away /
Away /
Home Arm
Home Arm Home Arm
Home Arm
Exit Timer
Exit TimerExit Timer
Exit Timer
Away Arm
Away Arm Away Arm
Away Arm
Entry Timer
Entry TimerEntry Timer
Entry Timer
Home Arm
Home Arm Home Arm
Home Arm
Entry Timer
Entry TimerEntry Timer
Entry Timer
Away Arm
Away ArmAway Arm
Away Arm
Home Arm
Home Arm Home Arm
Home Arm
1
11
1
Home Arm
Home Arm Home Arm
Home Arm
2
22
2
Home Arm
Home Arm Home Arm
Home Arm
3
33
3
Burglar
BurglarBurglar
Burglar No Response
Instant
Burglar
Alarm
Instant
Burglar
Alarm
Instant
Burglar
Alarm
Instant
Burglar
Alarm
Instant
Burglar
Alarm
Instant
Burglar
Alarm
Instant
Burglar
Alarm