User's Manual

Step7. After learning a device into the Control Panel, the Device Webpage will be changed to list

all available functions.

 Local Learning: The Control Panel feature local learning function for you to learn in the

device without using the webpage

Step1. Press and hold the learning button on the back of Control Panel for 10 seconds and

release when you hear a beep. The LED 1 will begin to flash green to indicate the

Control Panel is in learning mode.

Step2. Press the learn button on your devices to transmit a learn code, if the Control Panel

receives the learn code, it will emit two beeps to indicated. The devices will be added

into the Control Panel automatically.

Step3. After finish learning devices, press and hold the learn button on the back of Control Panel

until the Control Panel emits 2 beeps to leave learning mode.

Step4. Proceed to edit the device settings in the Control Panel Device webpage.