User's Manual



Temporary Code

The Temporary Code is used to access the system for a temporary user and is valid only

once per arming and once per disarming. Afterwards, the Temporary Code is

automatically erased and needs to be reset for a new Temporary user.

The Temporary Code consists of 4 digits and is not activated as default by the factory.

 Duress Code

The Duress Code is used to access the system in duress situation. When this code is used

for accessing the system, the Control Panel will report a secret alarm message without

sounding the siren to the Central Monitoring Station to indicate of a “Duress Situation in

Progress”.

The Duress Code consists of 4 digits and is not activated by factory default.

 Installer Code

The Installer Code is used for the installer to access the Control Panel via remote

command.

Factory default: 7982.

 Latch Option

Whe the option is selected, the Control Panel will report all arming/disarming action by this

user.

Latch.

When the the Latch option box is ticked, the Latch option is turned ON.

To edit the Codes on Web Page:

Step 1. Key in your preferred 4-digit code

Step 2. Enter a name for the code (optional)

Step 2. Choose to tick On / Off the Latch Option box.

Step 3. Press “Submit” to confirm the new uploaded details.