User's Manual
85
4
X - Crisis of Fire, Smoke, Gas, Carbon Monoxide or Water Leakage
is relieved.
When a crisis of fire, smoke, gas, carbon monoxide or water leakage is
relieved.
61 - AC Failure
When the Base Station’s AC power fails, the green LED blinks twice
every second.
62 - AC Power Restored
When AC power is restored to the Base Station.
6
4 - Base Station Low on Battery
When the Base Station is low on battery, the green LED blinks every 2
seconds.
65 - Base Station’s Low Battery Status Cleared
When the Base Station’s low battery status is cleared.
71 - Inactivity
When the Base Station makes an inactivity timer expired report.
72 - No WTR Learnt in
When the Base Station has no WTR learnt in.
8X - Fall Emergency
When Fall Sensor is triggered.
91 - Auto Check-in Report
When the Base Station makes an auto check-in report
to the CMS.
BX - Low Battery (IR/SD/WTR/CO/WS)
When Passive Infrared Motion Detection (IR), Smoke Detector (SD),
Wrist Transmitter (WTR), Carbon Monoxide Detector (CO) or Water
Sensor (WS) is low on battery, the green LED blinks every 2 seconds.
CX - Low Battery Status Cleared (IR/SD/WTR/CO/WS)
When the low battery status of Passive Infrared Motion Detection (IR),
Smoke Detector (SD), Wrist Transmitter (WTR), Carbon Monoxide
Detector (CO) or Water Sensor (WS) is cleared.
DX - Fall Inactivity
An inactivity code will be sent to the CMS if there is no movement
during guard time after fall detection.
EX - Sensor Supervision Failure
When the Base Station is unable to receive a signal transmitted from a
sensor for a period preset by the supervision timer.
F
X – Sensor’s Supervision Failure Status Cleared
When a sensor’s supervision failure status is clear
ed.