User's Manual
81
When the red help button on the Base Station is pre
ssed.
When Pendant #1 is pressed or triggered.
When Water Sensor is triggered.
When Fall Sensor is pressed or triggered.
When WTR (Pendant #1) or PB is pressed.
555155517 - Pendant #2 Emergency
When Pendant #2 is pressed or triggered.
5
15555518 - Pendant #1 Emergency (Low Battery)
When Pendant #1 is pressed or triggered when low on battery.
555155518 - Pendant #2 Emergency (Low Battery)
When Pendant #2 is pressed or triggered when low on battery.
551555517 - Inactivity
When the Base Station makes an inactivity timer expired report.
An inactivity code will be sent to the CMS if there is no movement
during guard time after fall detection.
555555558 - Base Station’s Battery Voltage Too High/Base Station
Low on Battery/Base Station’s Battery Disconnected
When the Base Station’s battery voltage is too high.
When the Base Station is low on battery.
When the Base Station’s battery is not connected, the green LED
blinks every 2 seconds.
5
55551557 - AC Power Failure in the Base Station
When the Base Station’s AC power fails for more than 10 seconds, the
green LED blinks every second.
555553557 - AC Power Restored/Base Station’s Low Battery Status
Cleared/Base Station’s Battery Disconnected Status Cleared
When AC power is restored to the Base Station.
When the Base Station’s low battery status is cleared.
When the Base Station’s battery disconnected status is cleared.
515555559 - WTR Supervision Failure
When the Base Station is unable to receive a signal transmitted from a
sensor for a period preset by the supervision timer.
555555559 - Auto Check-In Report
When the Base Station makes an auto check-in report to the CMS.
5
35555557 – WTR’s Supervision Failure Status Cleared/WS’
Emergency Status Cleared
When WTR’s supervision failure status is cleared.