User's Manual
79
7. Appendix
7.1. Contact ID Event Codes
100 – Base Station Emergency
When the red help button on the Base Station is pressed.
101 - Personal Emergency
When Wrist Transmitter/Emergency Pendant (WTR) or Fall Sensor is
pressed.
1
02 - Inactivity
An inactivity code will be sent to the CMS if there is no movement
during guard time after fall detection.
111 - Smoke Emergency
When Smoke Detector (SD) is triggered.
When the test button of Smoke Detector (SD) is pressed.
120 - Fall Emergency
When Fall Sensor is triggered.
130 - Burglary
(Defined by the installer/user)
147 - Supervisory Failure - Sensor
When the Base Station is unable to receive a signal transmitted from a
sensor for a period preset by the supervision timer.
1
54 - Water Emergency
When Water Sensor (WS) is triggered.
162 - Carbon Monoxide Emergency
When Carbon Monoxide Detector (CO) is triggered.
When the test button of Carbon Monoxide Detector (CO) is pressed.
301 – AC Power Failure in the Base Station
When the Base Station’s AC power fails for more than 10 seconds, the
green LED blinks every second.
302 - Base Station Low on Battery
When the Base Station is low on battery, the green LED blinks every 2
seconds.
311 - Base Station’s Battery Disconnected
When the Base Station’s battery is not connected, the green LED
blinks every 2 seconds.
3
44 – Jamming Detected
When the Base Station detects a jamming condition.