User's Manual

5
Base Station Definitions
Button/LED/Component Behavior Function/Indication
1 Red Help Button Pressed in idle/normal mode To summon emergency help
Pressed once in learning
mode
To select Pendant #2
Pressed for 3 seconds in
learning mode
To delete a selected pendant
2 Red Backlight Dimly lit Idle/normal mode
Blinking 1. Guard time
2. Pauses during retries of
alarm reporting
Brightly illuminating 1. Busy with alarm
reporting
2. After an alarm report
receives a callback and
until the call is hung up
3 Green Reset Button Pressed in idle/normal mode 1. To reset the inactivity
timer
2. For the Base Station to
report all the fault
problems it is
experiencing via voice
prompts
Pressed once before the
Base Station dials out for
alarm reporting
To cancel the alarm reporting
Pressed once during or at
the end of a two-way
communication
To terminate the two-way
communication
Pressed for 3 seconds in
idle/normal mode
To make a non-emergency
call (whether or not the
yellow button is programmed
as an away/home button)
Pressed for 10 seconds in
idle/normal mode
To reset the Mobile Unit
Pressed once in learning
mode
To select Pendant #1
4 Yellow Away/Home
Button
(Non-Emergency Call
Button)
Pressed once when serving
as an away/home button
To toggle on/off the inactivity
timer
Pressed once when serving
as a security button
To arm the system
Pressed once when serving
as a non-emergency button
To make a non-emergency
call
Pressed for 3 seconds To enter learning mode
Pressed once in learning
mode
To exit learning mode
5 Blue Backlight Steady on The inactivity timer is on.
Off The inactivity timer is off.