User's Manual

73
CID code 1-661 to the CMS.
S
tep 3. After the nurse has helped the user and completed his/her job, he/she
presses the green reset button on the Base Station again to signal
that his/her job has been completed. The Base Station sends CID
code 3-661 to the CMS.
 Scenario 2:
Step 1. The user presses the red help button on the Base Station to summon
help. The Base Station sends CID code 100 to the CMS.
Step 2. The nurse arrives and presses the green reset button on the Base
Station once to signal that help has arrived. The Base Station sends
CID code 1-661 to the CMS.
Step 3. The nurse needs more help and presses the red help button on the
Base Station to summon help. The Base Station sends CID code
1-662 to the CMS.
<
<
N
N
O
O
T
T
E
E
>
>
 If the green reset button on the Base Station is not pressed to signal that
help has arrived within the 15 minutes after the nurse presses the red help
button to summon more help, the Base Station will resend CID code 1-662
to the CMS. The Base Station will keep resending CID code 1-662 to the
CMS every 15 minutes for an hour if no help arrives.
Step 4. When the help the nurse needs arrives, the green reset button on the
Base Station should be pressed once to signal that help has arrived.
The Base Station sends CID code 1-661 to the CMS.
Step 5. After the nurse’s job is completed, he/she should press the green reset
button on the Base Station again to signal that his/her job has been
completed. The Base Station sends CID code 3-661 to the CMS.
 Scenario 3:
Step 1. The user presses the red help button on the Base Station to summon
help. The Base Station sends CID code 100 to the CMS.
Step 2. The nurse arrives and presses the green reset button on the Base
Station once to signal that help has arrived. The Base Station sends
CID code 1-661 to the CMS.
Step 3. The nurse finds that the user actually has no problem, so he/she gives
the green reset button two quick presses to signal that the case is
closed. The Base Station sends CID code 663 to the CMS.
 Scenario 4:
Step 1. The user presses the red help button on the Base Station to summon
help. The Base Station sends CID code 100 to the CMS.
Step 2. The green reset button on the Base Station has not been pressed to