User's Manual

52
SMS Remote Programming Commands Table (for the Mobil
e Unit)
Item Command Example & Usage Default
Sounding the
Mobile Unit
SCREAM Scream:PROG,1111,60
To set the length of the Mobile Unit’s beeping period (0~60
seconds) to help the search for the Mobile Unit when the
device is lost
--
Resetting
u-blox
RSTG RSTG:PROG,1111
To reset u-blox
--
SMS Remote Programming Commands Table (for the Base Station)
Item Command Example & Usage Default
GPRS APN,
username &
password
APN APN:PROG,1111,internet,,
To set GPRS APN, username and password (31 characters
max. for APN, 31 characters max. for username, 31
characters max. for password)
APN: Internet
Username and
password:
empty
Report settings RPT RPT:PROG,1111,1,0933111222,1,0,1
To configure report settings (index number, report
destination, group, type and option)
Index number: 1~20
Report destination: Depending on the reporting format
Group: 1~5
Type: 0 = Speech, 1 = CID, 2 = Scancom, 3 = Tunstall, 4 =
Franklin, 5 = CPC1, 6 = CPC2, 10 = CID_IP, 11 =
CID_SIA_IP, 30 = SMS_CID, 31 = SMS_TEXT
Option: 0 = No, 1 = Voice, 2 = Talk only, 3 = Listen in only
No report
destination
Checking the
Base Station
ECHO ECHO:PROG,1111
To check whether the Base Station can respond properly
--
Rebooting the
Base Station
RESET RESET:PROG,1111
To reboot the Base Station
--
Keyword setting KEYWD KEYWD:PROG,1111,IPOG
To set the keyword
15 characters max. for the keyword
PROG
Non-emergency
call settings
NONRP NONRP:PROG,1111,0912345678
To program the non-emergency call number
15 digits max. for the phone number
--
Access Code ACCES ACCES:PROG,1111,1,1234
To set the Access Code (index number, code)
8 digits max. for the Access Code
1111 for user 1
Guard time
settings
GUDT GUDT:PROG,1111,10,15
To set the length of guard time periods (system: 0~180
seconds, fall sensor: 0~180 seconds)
10, 15
Auto check-in
reports
TESTC TESTC:PROG,1111,720,60
To configure the settings of auto check-in reports (interval:
0~21600 minutes, offset time: 0~1440 minutes)
720, 60