User's Manual

50
4.3. SMS Remote Programming
You can do SMS remote programming via a mobile phone or SMS iWizard.
Make sure that the Mobile Unit is inserted in the charging base of the Base
Station before you proceed with SMS remote programming, which is effective
only when the Mobile Unit is inserted in the Base Station’s charging base.
SMS Remote Programming via a Mobile Phone
<
<
N
N
O
O
T
T
E
E
>
>
 Please change the language setting of your mobile phone to English
before you proceed with SMS remote programming.
 Please insert the Mobile Unit on the Base Station to configure both the
Mobile Unit and the Base Station via SMS remote programming.
Step 1. Enter the SMS screen on your mobile phone or smartphone.
Step 2. Enter the programming command (see the SMS remote programming
commands tables below).
Step 3. Enter a colon (:).
Step 4. Enter SMS Keyword (default is PROG).
Step 5. Enter a comma (,).
Step 6. Enter the Access Code (default is 1111).
Step 7. Enter a comma (,).
Step 8. Enter the parameter(s).
Step 9. The composition of the command is completed. You can send the
command to the Mobile Pers system now.
Example: To set 720 minutes for the supervision timer, you can send the
following command:
SUPPR:PROG,1111,720
SUPPR
=
Programming command
: = Colon
PROG = SMS Keyword
, = Comma
1111 = Access Code