User's Manual

43
4. Restoring the system to factory settings:
 You can click “Factory Reset” to restore the system to factory settings.
The system will immediately restore all programmed parameters to
factory settings and the Base Station will emit 2 beeps after you click
the “Factory Reset” button.
 If you want to keep your network settings and/or device settings,
please click the box(s) before these specifications before clicking
“Factory Reset.” Your network settings and/or device settings will then
be preserved while other programmed parameters are restored to
factory defaults.
 Please do not close the configuration screen while the system is being
restored to factory defaults. It will take at least 3 minutes for the system
to complete this step.
 After the system has been restored to factory settings, you have two
options to proceed with further operation:
- You can close the PC Programming Tool and restart it, or
- You can click “Clear” and then “Read” to view the renewed settings.