User's Manual

3. Editing and removing sensors:

 Editing the sound attribute of a sensor: Click any box in the section of the

sensor that you wish to configure. For example, if you wish to edit the

sound attribute of the sensor in Zone 3, you can click any box in the Zone

3 section. The “Dialog” pop-up window will be shown.

If you want the sensor in Zone 3 to be silent, tick “Silent” and “Edit.” If you

don’t want the sensor to be silent, leave the box in front of “Silent” blank

and tick “Edit.”

 Removing a sensor: If you want to remove the sensor in Zone 3, click

“Delete” on the popup window and the sensor will be removed. All devices

can be removed via PC programming.

 Click “Cancel” to close the “Dialog” popup window.