User's Manual

16
3.2. Setting up the Mobile Unit
Step 1. Please take the Mobile Unit out of the protective jelly case and use
tweezers to pull open the rubber cap covering the SIM card slot.
Step 2.
Hold the Mobile Unit with its front side facing you. Insert a micro SIM
card into the SIM card slot on the side of the Mobile Unit with the chip
side of the SIM card facing you. Please make sure that the micro SIM
card PIN code is deactivated and all SMS messages removed before
insertion.
Step 3. Insert the Mobile Unit into the charging base on the Base Station to get
its battery charged.
<
<
N
N
O
O
T
T
E
E
>
>
 The Mobile Unit must be inserted on the Base Station when you configure
the Base Station and the Mobile Unit via USB PC programming or SMS
remote programming (SMS programming is optional).