Product Info

 Away Arm: Select “Away Arm” and press the OK key to change system mode to “Away Armed”.
 Home Arm: Select “Home Arm” and press the OK key to change system mode to “Home Armed”
 Alarm Memory: This option will become available after an alarm is triggered. Entering the Keypad’s User Menu will be
directed to the Alarm Memory option automatically. Press OK to confirm selection, and then use

and

key to view
the alarm memory.
 Fault Display: This option will become available when fault event exists in system. To view fault events, select “Fault
Display” and press OK key to confirm selection. Use the  and  keys to view the fault events and press
Χ
key to
return to menu.
<
<
N
N
O
O
T
T
E
E
>
>
 If you try to arm the system when fault event exists, the arming will be prohibited and the LCD screen will jump to
Fault Display. If you want to force arm the system, perform the arm action again within 30 seconds. The system will
ignore the fault event and enter your selected arm mode.
 Log: Select “Log” and press OK key to view system log. Use the  and  keys to view the events and press
Χ
key to
return to User Menu.
 Setting: Select “Setting” and press OK key enter setting menu. Use the  and  keys to select setting options and
press
Χ
key to return to User Menu.
R
F
I
D
C
o
n
f
i
g
B
e
e
p
C
o
n
t
r
o
l
P
a
n
i
c
A
l
a
r
m
F
i
r
e
A
l
a
r
m
M
e
d
i
c
a
l
A
l
a
r
m
Q
u
i
c
k
A
r
m
 Mode Change Result
 Away Armed: When system changes to “Away Armed” mode, “Away Armed” will be displayed on the LCD screen
along with a long beep indicating successful operation.
 Home Armed: When system changes to “Home Armed” mode, “Home Armed” will be displayed on the LCD screen
along with 3 beeps indicating successful operation.
 System Disarmed: When system changes to “System Disarmed” mode, “System Disarmed” will be displayed on
the LCD screen along with 2 beeps indicating successful operation.
 Exit/Entry Delay: When the Entry/Exit delay timer is enabled in the Control Panel, and the Entry/Exit Beep function
is enabled on the Remote Keypad, Remote Keypad will count down with the system when Entry/Exit delay timer
begins. "Counting Down” will be displayed on the LCD for 10 seconds. The green LED will also light up for 10
seconds along with 1 beep every second. After 10 seconds, the LCD and the green LED will turn off, but the
warnings beeps will continue with the system count down.
 Operation Error: “Operation Error” will be displayed on the LCD screen along with 2 beeps indicating unsuccessful
operation; for instance, when you submit the mode change request from Arm to Home Arm.
 Fault Display: When the system arms with fault, “Fault Display” will be displayed on the LCD screen along with 3
beeps indicating arming fault.
 Incorrect PIN Code: When incorrect password is submitted, “Incorrect PIN Code” will be displayed on the LCD
screen along with 4 beeps indicating wrong password.
<
<
N
N
O
O
T
T
E
E
>
>
 After the mode change request is submitted, if no signal is received from the Control Panel, the Keypad will return
.to stand-by mode within 15 seconds.
 If there are 5 incorrect PIN Code attempts within 10 minutes, the Remote Keypad will be automatically locked up
.for 5 minutes. During this period, any operation will be invalid. When the lockup time expires, the Remote Keypad
.will emit 1 long beep.
 Dual Key Alarm Functions
 The dual-key function is disabled by default. To enable it, enter the setting menu of the Remote Keypad to set alarm
triggers (Choose Setting > Panic Alarm/Fire Alarm/Medical Alarm > Enable, and then press OK).
 Panic Alarm: Press “1 + 3” to trigger a Panic Alarm.
 Fire Alarm: Press “4 + 6” to trigger a Fire Alarm.
 Medical Alarm: Press “7 + 9” to trigger a Medical Alarm.
 When an alarm is triggered, “Alarm! Alarm!” will be displayed on the LCD screen, and the green LED will light up for
10 seconds.
 Beep Control:
This function is for you to set the Keypad warning beep functions.
 Entry/Exit Beep: The function is disabled by default. To enable it, please choose Setting > Beep Control >
Entry/Exit Beep > Enable in the user menu, and press OK to confirm setting.
 Alarm Beep: The function is disabled by default. To enable it, please choose Setting > Beep Control > Alarm
Beep > Enable in the user menu, and press OK to confirm setting.
 Joining in the System Network
Wireless Operation:
 To add the Remote Keypad into the system network, first put the Control Panel in learning mode.
5