Specifications

video.

 Request Video (All) : All PIR Video Cameras and IP Cameras in the system will

record a video.

 Setup UPIC:: The UPIC and specified zone will transmit Off/Heat/Cool command to the

air conditioner as programmed.

 Hue Control:: Adjust the hue and saturation of the Philips Hue at sepecified zone as

programmed.

 Trigger Alarm: Choose to activate one of the following alarms: High Temperature

Alarm, Low Temperature Alarm, High Power Consumption Alarm, High Humidity Alarm

and Low Humidity Alarm

 Apply Scene:: the system will execute preprogrammed Scene number. Please refer to

8.3. Scene for detail.

8.3. Scene

The Scene setting allows you to customize a series of actions with your devices, such as Power

Switch control, image/video request, mode change and trigger alarm. The programmed scene

can be set to activated when a device is triggered. (See 5.1.3. Edit Devicesl), or when a Home

Automation Rule is excecuted. (See 8.2. Home Automation) For example, you can set a scene

to control multiple lightings, then set your Remote Controller to activate the scene when the

Hue

Saturation