Specifications

49
 Area
Select an opeartion area.
 Rule Condition
The rule condition determines under which circumstances the rule should be activated.
 Empty : When set as Empty, the system will follow the schedule time and execution
rule to respond accordingly.
 Trigger Alarm : When set as Trigger Alarm, if the specified alarm event
(Burglar/Some/Medical/Water/Silent Panic/Panic/Emergency/Fire /CO Alarm) is
triggered, the rule will be activated according to rule schedule and execution setting.
 Mode Change : When set as Mode Change, when the system enters specified mode,
the rule will be activated according to rule schedule and execution setting.
 Mode Change and Exit Timer Stopped : When set as Mode Change and Exit Timer
Stopped, when the system changes mode to and Exit Delay Timer expires, , the rule
will be activated according to rule schedule and execution setting.
 Mode Start Entry Timer : When set as Mode Start Entry Timer, when the system