Specifications

41
6.3. PIN Code
The User PIN Codes are used by Remote Keypad accessory to control system mode remotely.
The 2 areas in the control panel each has 6 User PIN Codes available for setting. Each consists
of 4 digits (numeric number 0~9). User PIN code #1 for each Area is always activated factory
default.
User PIN #1 in Area 1 User PIN #1 in Area 2
Password: 1234 Password: 4321
Area
Area: Select the area for setting User PIN Code.
User Code Setting
 User Code: Enter the 4-digit code in the field.
 User Name: Enter a user name for easy recognition of system events. Up to 17
alphanumerical characters are allow for each user name.
 Latch:
Latch  Latch Report ON = Whenever the User PIN Code is used to change
system mode, the panel will report the event.
Latch  Latch Report OFF = When the User PIN Code is used to change system
mode, the panel will not report the event.
 Delete: Check the box if you want to delete selected user. User#1 in each area cannot
be deleted
After finish all setting, click OK to confirm change.